E-mu Emulator Sampler User Forum for the EIII EII EI and EIII XP

General Category => EIII Technical Issues / Tips => Topic started by: 80sboy on April 02, 2012, 10:56:46 PM



Title: New EIII Owner! Stereo outs not working
Post by: 80sboy on April 02, 2012, 10:56:46 PM
Against the advice of my local tech (Hey Chris!) I went ahead and did a trade for an EIII keyboard, in non-working stated condition. The trade was financially amicable for both parties which is always nice. I always like a straight trade. So.....

   When I got it the seller and I checked it out and it basically was just powering up with random LED's and black squares on the display. Got it home  - made dinner, fed the kids, had a beer and promptly fell asleep on the couch.

  Exciting stuff I know, but I'm getting to the even better part. Kids to bed, screwdriver in hand I proceeded to open up the EIII, go through all the cables etc...reseated some stuff, discovered a broken pin on a header to the mod wheel, but otherwise very very clean inside. Powered it on and off a few times and, lo and behold, it powered up! The seller had made me a floppy of the OS from his working EIII (he had purchased this EIII as a backup) and I got it to boot up from the floppy, then after a few minutes of jumping up and down and trying to explain to my wife why this was the coolest thing to happen tome today, I got it to boot up from the internal 320meg conner drive. yeah! Exciting stuff....bunch of great sounds installed...

   So, problems....stereo outs are not working. Individual outs are. Things to look for?Easy(ish) fix? Have to fix the header pin for the mod wheel.

     Since I have it open, what are the things to look for? I'm going to fix the header pin, check the voltages on the power supply and check all connections. I purchased an acard scsi to ide converter to pop in a CF card eventually.

  Anyways, thanks to my tech for trying to save my marriage and keep me from getting another boat anchor (how's the rev 1 EII coming along?)
; )

  I just had a gut feeling from talking to the owner that this one could be fixed. The trade was very good for me financially if it worked and I felt like I could get my money back if it didn't by breaking it for parts.

  Thanks!

tom


edit: Stereo outs working! 5v rail was running about 4.5, brought it up to 5.05 and now the stereo outs are working. Glad I checked before I ran a wire to IC3. Amazing sounding sampler!


Title: Re: New EIII Owner! Stereo outs not working
Post by: Zomnius on April 28, 2012, 01:05:03 PM
so waht did you really do to improve you're EIII?

- you improved railpower to 5,05 from 4,5 how did you do this?
- switching couple times on and off a couple of times, and then it started from the HD? This is not likely to be very reliable, or did it improve after fixing the psu?

Please tell me (us) more about the routing you folowed.

thx!!


I now have to fix 2 of these beasts...


Title: Re: New EIII Owner! Stereo outs not working
Post by: 80sboy on April 28, 2012, 10:46:37 PM
Yes, I improved the rail with the trim pot in the power supply while reading from the yellow wire. I think for me, just the act of moving it around from my car to home was enough to sort of jiggle it close enough to get it to power up, but it was not powering up reliably.

 After making sure that the 5v rail was a true 5.05 (and I've since re-measured and it's solid) it has had ZERO problems. I've also installed a CF card internally and that works great now. It took ALOT of backand forth with different cards etc, but it's working solid.

  FIrst thing I would do to ANY EIII is take a reading on the 5v rail. It was the only problem on this machine.

Best

80sboy
Tom


Title: Re: New EIII Owner! Stereo outs not working
Post by: rectape on January 21, 2018, 03:30:35 PM
Interesting,

Today I had to flip the floppy drive with a cf card reader and had to force the cf card a bit. After that very low stereo output level :-\

I hope that it?s the same problem but will wait for my tech guy to check this.


Title: Re: New EIII Owner! Stereo outs not working
Post by: rectape on February 02, 2018, 07:01:51 AM
Done it's working great now!