|
Title: E ii sampling issues Post by: ImmerIch on November 07, 2016, 04:13:20 PM Hallo all...
Finally i have bought a Emulator II. It is in a used condition, but should work anyway. Booting into 3.1 works, but pressing the Button in the sampling section gives some trouble. I can manage every setting in this menu, but when it comes to sampling the issues start. Arming the Sampling works, but it wont sample. Even if i use different values as treshold. Sampling signal is ok, also monitoring on the output. Force sampling only brings me to the point that i should use Slider A. Nothing Happens At all. Finally i have to reboot to leave the sampling sections. Anyone any clues or hints? Title: Re: E ii sampling issues Post by: dr.c on November 11, 2016, 04:48:09 AM Sampling signal is ok, also monitoring on the output.
You mean the sampling incoming signal ? This is NOT ok, the sampling signal is NEVER monitored on the output. You channel 1 (Channel 0) is bad. I would have to look at the diagrams, but is the sound OK when you play a sound from a diskette ? I will be back on the 15th of november. Title: Re: E ii sampling issues Post by: dr.c on December 10, 2016, 10:07:33 AM How is it going ?
|