E-mu Emulator Sampler User Forum for the EIII EII EI and EIII XP - Drumulator technician

Welcome, Guest. Please login or register.
Did you miss your activation email?
March 28, 2024, 04:36:38 PM
Home Help Search Login Register
News: Problems registering? Send an email to: EIII @ telenet.be (without the spaces)

+  E-mu Emulator Sampler User Forum for the EIII EII EI and EIII XP
|-+  General Category
| |-+  Drumulator Technical Issues / Tips
| | |-+  Drumulator technician
« previous next »
Pages: [1] Print
Author Topic: Drumulator technician  (Read 6956 times)
Jvpiter8
Full Member
***
Offline Offline

Posts: 49



« on: November 19, 2014, 08:04:43 AM »

Hi guys. I recently bought a drumulator, latest revision with factory midi. Pretty good shape, everything worked fine until a week ago. It hanged up. After letting cooling off the display said Bad at star and some of the sounds sound very distorted, not even recognizable. Just the bdrum sounds ok.
Any technician near the Ohio area?

Thanks.
Logged

- No more floppy seconds - Emax HD
gertie
Full Member
***
Offline Offline

Posts: 65


« Reply #1 on: November 19, 2014, 10:19:44 AM »

you could try doing a reset to see if that fixes it....it may be that your battery is dead
(if its your battery then any electronics technician can fix it locally)

http://www.circuitbenders.co.uk/forum/index.php?topic=1616.0;wap2

If you are getting the BAd error message at start-up you can try clearing all memory using the following button push sequence, but remember this will wipe any patterns you may have stored:

Switch on.

Press the song/segment button so that the segment mode is selected.

Hold down the Insert/Erase button and press the Cassette button once, do not release the Insert/Erase button.

The message "poof" appears in the screen (no, really).

Whilst still holding down Insert/Erase press the Enter button.

Switch off and on again - all memory should now be cleared and the BAd message should be gone and the Drumulator should work normally.

It's also worth changing the internal battery as they were only meant to last for 5 years or so - you need a 2/3 AA, 3v Lithium battery with solder tags (2 tags not 3).
« Last Edit: November 19, 2014, 10:29:21 AM by gertie » Logged
Jvpiter8
Full Member
***
Offline Offline

Posts: 49



« Reply #2 on: November 19, 2014, 01:30:21 PM »

Thanks Gertie. Ill try to do a reset. What I'm mostly worried about is that some of the drums just spit distorted noise. That might be a memory issue?
Logged

- No more floppy seconds - Emax HD
obsoletemachines
Full Member
***
Offline Offline

Posts: 38



« Reply #3 on: April 13, 2015, 01:03:46 AM »

Hi, I have gone through a lot of this and I'm down to a faulty demux. Check your tl084s
Logged
dr.c
E-mu Doctor
Hero Member
*****
Offline Offline

Posts: 903


I'm a hot dog !


« Reply #4 on: April 19, 2015, 02:35:15 PM »

Check you analog PSU, and sound roms as well
Logged
Pages: [1] Print 
« previous next »
Jump to:  


Login with username, password and session length

E-mu Emulator Sampler User Forum for the EIII EII EI and EIII XP - Drumulator technician

SEO light theme by © Mustang forums. Powered by SMF 1.1.21 | SMF © 2015, Simple Machines