data & volume sliders stuck at 000

[nuipb]

Hi to all,

It seems I have the "data & volume sliders stuck at 000" problem many have known in the past but none of the solutions I found in the forum worked, I tried:
- Master/8/3
- Master/8/0/1358/2 (here I get Ped000 - Dat000 - Vol000 - Lwh000 - Rwh000)
In both cases all fields of data & volume sliders are stuck at 000 and the digits on the screen are kind of blinking/agitating like someone else is moving another slider somewhere cancelling and resetting at 0 any message from the front panel sliders....
- verifying PSU calibration
- swap memory SIMM cards
- checking the flat cable
- checking the sliders in terms of output voltage (I get 0V when down and 4.90 when up).
I even unsoldered the sliders to check they were working correctly and they do.

So I'm out of ideas now, would any of you have any other suggestion by any chance ? 

[dr.c]

Hi, the woobleing is normal, its just the "hum" and noise on the line goig to the converter. It means that the A/D is working, otherways, you would get nothing.
Retry
Master/8/0/1358/2
Move the data slider, put it the lowest as possible, = Enter
The highst possible + enter
Save : Y

Check the cabling, by yourself a yukulele...