|
Title: Gotek Hxc with 2.42 OLED Display and Rotary Encoder Project Post by: dfiorucci on February 27, 2020, 03:15:48 PM So I installed a 0.91 OLED display along with the a rotary encoder into the Gotek case.
After using it for a couple of weeks I've come to realize my eyes are having a hard time reading the display after awhile. So I started to look into adding a larger display. What I've been able to model up is a 5.25 floppy sled that will house a 2.42 OLED 128x64 along with the Gotek pcb and rotary encoder. Should be allot easier to read. I tried to upload a picture but the folder was full. Title: Re: Gotek Hxc with 2.42 OLED Display and Rotary Encoder Project Post by: dfiorucci on March 02, 2020, 06:50:36 PM If you would like to get a sneak peak at what I have planned PM me.
Title: Re: Gotek Hxc with 2.42 OLED Display and Rotary Encoder Project Post by: dfiorucci on March 05, 2020, 06:54:24 PM Now with Pictures
Standard Gotek case with 0.91" OLED Display on top New 5.25" floppy sled with 2.42" OLED on the bottom. Also working on a hardware debounce using schmitt triggers for absolute zero jitter from the rotary encoder. Title: Re: Gotek Hxc with 2.42 OLED Display and Rotary Encoder Project Post by: dfiorucci on March 07, 2020, 05:40:24 PM Hardware debounce circuit and PCB design done. ;D
Project starting to take shape. Title: Re: Gotek Hxc with 2.42 OLED Display and Rotary Encoder Project Post by: Electro disco club on March 09, 2020, 01:26:46 PM Looks Amazing work.
Great! Title: Re: Gotek Hxc with 2.42 OLED Display and Rotary Encoder Project Post by: dfiorucci on March 11, 2020, 07:32:21 PM I made a second version in case someone wanted to mount it in a Gotek case.
Because if it was attached to the rotary encoder it wouldn't fit. The J2 header pins go to the rotary encoder. Title: Re: Gotek Hxc with 2.42 OLED Display and Rotary Encoder Project Post by: dfiorucci on March 11, 2020, 07:34:19 PM Made some small revisions to the original put in the rotary encoder and was able to get rid of the one via in the routing.
Title: Re: Gotek Hxc with 2.42 OLED Display and Rotary Encoder Project Post by: dfiorucci on March 15, 2020, 03:49:39 PM 3d printer arrived and I have the first prototype done just waiting on new display to arrive.
Also waiting on black ABS filament for the final version. The display area is going to be a great improvement. Title: Re: Gotek Hxc with 2.42 OLED Display and Rotary Encoder Project Post by: dfiorucci on March 16, 2020, 08:15:33 PM I once was blind but now I can see ;D
I could see this from 10 feet back. No more squinting LOL. Only problem is they sent me a white display instead of the blue one that I ordered. Didn't notice it until I turned it on after installing it. All that is left is printing the new bracket with a small modification out of black ABS and installing the debounce PCB once it arrives. If any one is interested PM me. Title: Re: Gotek Hxc with 2.42 OLED Display and Rotary Encoder Project Post by: dfiorucci on March 27, 2020, 12:57:40 AM Here are the before and after pictures.
I'm very pleased with the results. Title: Re: Gotek Hxc with 2.42 OLED Display and Rotary Encoder Project Post by: Electro disco club on March 28, 2020, 02:02:10 AM Great,
You have to serialize this job ;) Title: Re: Gotek Hxc with 2.42 OLED Display and Rotary Encoder Project Post by: dfiorucci on April 08, 2020, 06:28:57 PM I'm getting ready to start production on these if you are interested in one PM me.
|