|
Title: Will a Meanwell RT-65C work in the EII? Post by: brian_ronn on October 02, 2020, 06:08:58 AM Hi
Have any of you replaced the original PSU with a Meanwell RT-65C? The specs for the RT-65C is as follows: Type: Switching,Regulated Style: Enclosed AC Input Voltage: 88 to 264 V Number of Outputs:3 Output Voltage:5,15,-15 V Maximum Output Current:8,3,1 A Maximum Output Power:65.5 W Input Connector Type:Screw Terminal Block Dimension:129 x 98 x 38 mm Unit of Measure:Per Each The Meanwell T-60C is hard to get and the RT65C could be the replacement. Best regards Brian Title: Re: Will a Meanwell RT-65C work in the EII? Post by: esynthesist on October 02, 2020, 08:50:48 AM I haven't. But the Meanwell RT-85C should for sure work, because that one was used in Abstrakt Instruments Emulator-II drop-in replacement PSU.
See also http://eiiiforum.com/index.php?topic=3552.msg12665#msg12665 (http://eiiiforum.com/index.php?topic=3552.msg12665#msg12665) Abstrakt is not selling them anymore, but the bare Meanwell RT-85C PSU seems still to be available on electronics web shops. (BTW: the installation manual of the Abstrakt Instruments PSU is still available for download on their website) Title: Re: Will a Meanwell RT-65C work in the EII? Post by: brian_ronn on October 12, 2020, 11:53:38 PM Hi Esynthesist
Thank you for replying. I've just ordered 2 Meanwell RT-85C and downloaded the manual from Abstrakt Instruments. The install looks fairly simple. Best regards Brian Title: Re: Will a Meanwell RT-65C work in the EII? Post by: dfiorucci on March 16, 2021, 12:44:47 AM Someone was using an RT-85C along with two buck converters to make a power supply that would give you all of the rails that you needed.
It was fairly simple I'll see if I can track it down again. |