|
Title: Did a HUGE job To my 2 Emulator II+ Post by: roginator on June 04, 2011, 03:19:46 PM done this to bouth machines! AND TODAY THEY WORK PERFECT!
I decided to do additional work on EII ... so next is done on this baby (I did it like i do it for myself.. ) 1. removed Old dead SCSI and HD from EII... just problematic part without any chance to fix! (only one was HD) 2. upgraded OS to 3.1 .. new eproms burned and installed 3. Recapped PSU unit with Hi Quality panasonic LOW SRE Capacitors 4. Audio flow and analog part of electronics replaced Tantalum caps with NEW Kemet type 5% 5. Recaped 1 Floppy Drive (space for second floppy is empty since there was removed HD... future place for HcX drive) 6. All PSU rails are recapped too on bouth Mother PCBS 7. Floppy Drive is fully cleaned (up to last part) 8. Replaced LCD display with VFD and removed Hi Voltage inverter 9. cleaned KEYBOARD 10. Cleaned every switch on front panel 11. Cleaned Slider for program Control 12. Generaly cleaned DUST from inside of EII 13. Calibrated EII by service manual 14. Lost Fuse holder Replaced with NEW one! NEXT HXC DRIVE and one of EII+ machines goes to NEW home!!!! :) One is keeper forever!!!!!!! Title: Re: Did a HUGE job To my 2 Emulator II+ Post by: esynthesist on June 05, 2011, 03:06:38 AM Sounds like it is brand new again and ready for a next shift of 30 years !
Congrats. BTW: if you say you have calibrated the unit... does this mean you have the calibration floppy disk ? Title: Re: My Emulator II+ will not boot up. Post by: EIIBD on June 07, 2011, 07:26:35 AM Hello Roginator!
Congrats on the EII+ rebuild. You sound like an EII+ authority. I'm hoping you may have a suggestion for me regarding my 1985 EII+, that I purchased new that year. Cosmetically, my EII looks new. Always kept clean, and dust free in my studio. Here's my problem.... My EII+ (w 2 floopy drives) will power up, but all the LED's on the front (including the lights on the floppy drives) are randomly flashing and both floopy drives are clicking (trying to load data from the inserted discs), but the drives will not load the data (have tried many different factory discs, P.2.3 and P.3.1 with no success). The display shows random digital readout info that makes no sense. I removed the floppy drives, and used air compressor to remove any dust. Still no boot up. I would appreciate any advice you may offer, as to where the problem may be and how I should approach the repair. Do you know where I can get a schematic diagram, so I can at least test the voltage on the PSU rails. Thanks, EIIBD Title: Re: Did a HUGE job To my 2 Emulator II+ Post by: Zomnius on August 06, 2011, 06:44:02 PM hello, do you have a more specific parts list of the recapped psu?
Title: Re: Did a HUGE job To my 2 Emulator II+ Post by: 80sboy on August 15, 2011, 10:33:39 PM I second that emotion on the parts list. I have 2 power supplies ready for the EII, a 5/12 switcher and a +-15 linear. i need to fabricate a different mounting plate, which will take some time, and also need to re-do the wiring harness, but in the meantime I would like to order all new caps for the original power supply just incase. If there was a nice Mouser etc parts list that would be great for many people on this list.
80sboy |