|
Title: oberheim dpx-1 midi implementation chart - anyone?? Post by: Elmbeatz on March 29, 2012, 12:54:05 PM Hi freaks!
I'm looking for it - especially for assigning a controller to "entry value". Best, ELM. Title: Re: oberheim dpx-1 midi implementation chart - anyone?? Post by: 80sboy on March 31, 2012, 11:09:26 AM I was also searching for this, could not find out anything anywhere. i tried to monitor the midi output to see if any of the buttons sent midi and they do not. They only thing I found that may make it a bit more useful is the data dial.
http://home.pages.at/pullrich/m_music4.htm It could theoretically be wired up externally with a long cable maybe to allow filter control. tom Title: Re: oberheim dpx-1 midi implementation chart - anyone?? Post by: lubb on March 31, 2012, 12:52:44 PM DPX 1 MlDl Implementation:
Basic Channel select for Transmit and Receive Modes: Mode 1: OMNl On, Poly Mode 3: OMNl Off, Poly Mode 4: OMNl Off, Mono (Prophet 2000-series only) Controllers: Controllers ON/OFF select Patch Change Commands ON/OFF select Controllers supported as defined by sample disk MlDl Sample Dump Standard supported (from the DPX1 factory specifications) |