|
Title: hello I have a problem on an E3 not boot Post by: philippe.69 on June 25, 2012, 11:00:24 AM hello I have a problem on an E3
he asked Mounting disc it has frozen 10 min at lcd I disconnect restart There Is nothing in the LCD just light blue When I move maximum the potentiometer rotary for the LCD panel many LED panel light it does not boot on floppy it nothing happens :'( someone has an idea of the problem thanks philippe Title: Re: hello I have a problem on an E3 not boot Post by: philippe.69 on June 27, 2012, 11:57:01 PM one there? the idea has ???
Title: Re: hello I have a problem on an E3 not boot Post by: mg73 on June 29, 2012, 11:08:25 AM I don´t really understand your problem.
Is the LCD blank from start? What do you mean by 10minutes? It doesn´t boot either from HD or floppy? Title: Re: hello I have a problem on an E3 not boot Post by: 80sboy on June 29, 2012, 10:07:25 PM I would check and make sure your 5V supply is at 5.05V. Seems to cure a multitude of sins. There is a trimmer for it.
80sboy tom Title: Re: hello I have a problem on an E3 not boot Post by: philippe.69 on July 02, 2012, 12:07:58 AM I don´t really understand your problem. Is the LCD blank from start? What do you mean by 10minutes? It doesn´t boot either from HD or floppy? What do you mean by 10 minutes? it and stay on the Mounting disc and I turned off the e3 the restart nothing works in the boot program lcd just light it nothing happens Title: Re: hello I have a problem on an E3 not boot Post by: philippe.69 on July 02, 2012, 12:10:30 AM I would check and make sure your 5V supply is at 5.05V. Seems to cure a multitude of sins. There is a trimmer for it. 80sboy tom thank you I check tonight but I doubt the problem and 5.05V this is the first time I see this failure it works very well before he loaded the bone I even change the eeprom 380/381 this failure always ??? anyway thank you for this beginning of subjection to follow thanks, philippe Title: Re: hello I have a problem on an E3 not boot Post by: tomteck on July 07, 2012, 03:48:59 AM Why did you change the Eprom?
Title: Re: hello I have a problem on an E3 not boot Post by: philippe.69 on July 10, 2012, 02:39:52 AM new reprogram it does not start better
Title: Re: hello I have a problem on an E3 not boot Post by: dr.c on July 12, 2012, 04:40:37 AM Many times, wise guys taking E3 appart don't see that the scsi cable passes THRU the vent of the card cage, and then, goes to the disk.
If you pass the cable on top, the pins of the front panel drill holes into it and make shorts. I bet this guy is french, he can write to me in french at the Keyboards recording forum, Dr.C We will copy here, translated. Title: Re: hello I have a problem on an E3 not boot Post by: philippe.69 on July 13, 2012, 12:35:22 AM Many times, wise guys taking E3 appart don't see that the scsi cable passes THRU the vent of the card cage, and then, goes to the disk. If you pass the cable on top, the pins of the front panel drill holes into it and make shorts. I bet this guy is french, he can write to me in french at the Keyboards recording forum, Dr.C We will copy here, translated. Bonjour oui je suis français Les câbles SCSI son placer correctement sur les pins sans erreur Je connais bien le E3 pour en avoir dépanné quelque 'un mais cette panne je ne les jamais rencontrer J’ai deux E3 un ou j’ai réparé l’alim et quelque petit problème on été corriger Il fonctionner bien avec un disque dur scsi 40Mo d’origine Emu de couleur Noir Un 2 eme E3 en panne J’ai testé les cartes de celui qui ne fonctionner pas Une a une sur celui qui marcher J’ai découvert que des ic PCM53JP-1 Monter sur support sur une PCB Ouput été en mauvais contact sur leur support Apres avoir nettoyer les pattes des ic le 2eme redémarré sur disquette correctement Lui n’avez pas de disque dur installé Quand j’ai testé une 2eme fois la carte cpu board sur celui ou et installé le disque dur 1er E3 J’ai laisse faire la procédure de montage du disque dur L’écran et rester sur mounting disc j’ai attendu 10mn rien ne changer j’ai arrêté le E3 Et redémarrer et la plus rien il ne démarrer plus J’ai replacé l’autre carte cpu board Originale du 1er E3 la même chose il ne veut plus démarrer aussi Je me retrouve avec les 2 E3 en panne LCD avec juste une lumière il ne démarre pas l’os Title: Re: hello I have a problem on an E3 not boot Post by: dr.c on July 24, 2012, 02:21:29 PM Its an english forum here.
Open your machine, do not disconnect any cable, take a picture and send it to : dr.c@noos.fr |