|
Title: Garbled text on my display. Post by: Data on February 09, 2013, 07:46:26 AM I see garbled text on my display. Does anyone have a clue what the problem might be?
(http://i47.tinypic.com/2cm4gy.jpg) (http://i47.tinypic.com/34i9k.jpg) (http://i50.tinypic.com/21oajn.jpg) Title: Re: Garbled text on my display. Post by: Data on February 09, 2013, 08:41:52 AM This seems also my problem.
http://eiiiforum.com/index.php?topic=1785.0 Title: Re: Garbled text on my display. Post by: blackelk001 on February 09, 2013, 11:11:25 AM If you disconnected the ribbon cable to the analog board does the problem go away?
Title: Re: Garbled text on my display. Post by: Data on February 09, 2013, 11:17:49 AM Yes, remove cable is normal operation.
Title: Re: Garbled text on my display. Post by: Data on February 14, 2013, 12:18:32 PM Today i and an older experienced guy went to look for the problem
We found a couple of parts that looked strange to him. #1 - resistor - after measurement it did not respond - other resistors did respond/measure (therefore the temp bypass) C5 (http://i48.tinypic.com/qys2t2.jpg) Title: Re: Garbled text on my display. Post by: Data on February 14, 2013, 12:22:22 PM #2 another resistor that did no seem to function/measure. C64
(http://i47.tinypic.com/2wqtx1g.jpg) Title: Re: Garbled text on my display. Post by: Data on February 14, 2013, 12:25:58 PM #3 - L8212CPA ic - gives not stable output or seems like it.
After first investigation today, we decided to get a new one and put it on the board and see what will happen before we continue troubleshooting (http://i45.tinypic.com/eqyy2w.jpg) Title: Re: Garbled text on my display. Post by: Data on February 14, 2013, 12:39:37 PM #4 - flat cable
We checked the flat cable. All lines checked ok, except for the last one. This could be design. According to the old man this one was not in use on the board. (my opinion) strange. Why would they disable the flat cable, if you dont use it, just leave it like that. Understand what i mean? (http://i49.tinypic.com/28b729w.jpg) Title: Re: Garbled text on my display. Post by: Data on February 14, 2013, 01:04:57 PM L8212CPA is ordered, comes from China, will need some time to come here. €4,26 (total cost incl. shipping)
|