|
Title: EMAX PROBLEMS not mentioned yet .. need help Post by: serpath on March 20, 2013, 11:25:48 AM hey all,
i have an emax 1 and after a while he start at bootup to let the analog processing led be lit up for a while. i also have to say that use a floppy emulator for 8 months but at december it starts to do some weird things. the led i already mentioned mean UNABLA TO LOAD SOFTWARE .. from were? which destination? also sometime it crashs in some distorted notes or the sound left fully and just the click of the fitlers are audible. so thats the point the diagnostic pdf says: MAYBE THE ECHIP IS NOT CALIBRATED .. in the service manual i found a trimmer in the shematic left the e chip .. but there is none on the board (rev 2) .. the only trimmer i found is that on the PSU .. should it be that one which be needed to get trimmed? i repaired much synths but that emax is a mysterium to me because that e-shit .. uhem chip ^^ thing. if i start a sequence it plays for a randomly time for a while .. but anytime the sound doesnt appear anymore .. i need to do a reload. i also replaced all sound memory, cleaned every socket chip (the legs with aceton). i also did some recapping .. but now it drive´s into frustration .. maybe someone could help anyhow .. would be great !! cheers micha Title: Re: EMAX PROBLEMS not mentioned yet .. need help Post by: serpath on March 21, 2013, 01:22:02 PM .. mmh ... so is that trimpot on the power supply the trimpot for calibrating the e chip? yes or no? :) ???
|