|
Title: need help about this err BniA F Dcta: S/B Post by: inspactor on April 28, 2013, 04:59:58 AM hi after transport the eII it wont start up. after run diagnostic it shows me always " err BniA F Dcta: S/B "
can anybody help? thx greets Title: Re: need help about this err BniA F Dcta: S/B Post by: esynthesist on April 28, 2013, 12:22:15 PM It seems that even the error message of the diagnostics test is totally messed up.
Which could be an indication that there's a problem with the memory ICs in which the diagnostic software itself has been loaded. Perhaps you should check IC59 and the ICs 13-20 on the digital board (check if they are not loose after transport, perhaps reseat them, or swap some of them if the problem remains...) Title: Re: need help about this err BniA F Dcta: S/B Post by: inspactor on April 30, 2013, 03:38:19 AM ok will try nowmore later thx
Title: Re: need help about this err BniA F Dcta: S/B Post by: inspactor on April 30, 2013, 04:05:50 AM first i dont found the ic 59 on the digital board. second i swap them und change them ive got new piecec of ic´s without results.
the eII ist booting normal shows me insert disk than i put a disc in the drive only 3 times klack klack klack and than nothing it repeads after 2 seconds. i had the problem in the past but i dont know how to fix. thx krelle Title: Re: need help about this err BniA F Dcta: S/B Post by: inspactor on April 30, 2013, 04:09:21 AM ok now i found the problem it was an ic in the next row i reseatet all of the others and than there was the problem!! uuuui thx
|