|
Title: How to use the EII Debug Rom Post by: FairlightCMI on February 13, 2014, 06:10:08 PM Hi Guys-
I think my EII has a memory problem as it's showing the typical symptoms. I have a Debug rom I bought years ago, but never actually needed to use. I have the cable and theh PUTTY app to create a terminal session from an old PC with serial bus. I do have the "instructions" from the service manual, but not sure how to interpret it. Is there anyone in here who could explain in laymen terms how to conduct the test procedures and interpret the test results? I'd greatly appreciate it. Thanks in advance. George Title: Re: How to use the EII Debug Rom Post by: who on February 13, 2014, 08:28:25 PM Esynthesist wrote a doc explaining how to do it called EII Memory Test.pdf (attached). You just need it and the memory test disk. (You have an HXC, right?)
Title: Re: How to use the EII Debug Rom Post by: FairlightCMI on February 13, 2014, 09:23:17 PM Hi Who, thanks for your reply and the doc. I actually dont have the memory test disk, but the debug rom that you use with a terminal, which allows for more comprehensive testing.
I also dont have hxc (yet). Title: Re: How to use the EII Debug Rom Post by: who on February 13, 2014, 10:50:15 PM It sounds like your technical skills are far beyond mine. :-[
Please share how to do it with the debug rom if you have the time. Title: Re: How to use the EII Debug Rom Post by: FairlightCMI on February 16, 2014, 02:23:22 PM I will definitely share if figure it out. Thanks.
|