|
Title: CF-cards compatible with Emax 1 Plus and Spyrus reader? Post by: kimzim on November 30, 2014, 05:18:35 AM Hi all,
I´ve just got hold of a Spyrus CF-card reader for my Emax SE Plus (with external SCSI) on Ebay. Got it yesterday and connected it and was looking forward to using fast and silent CF-cards instead of noisy hard drives or floppy. After making the connections, choosing SCSI ID 0 (to be able to boot from the card) I tried to format the card that came with the Spyrus. I used the floppy as source for the system (Plus OS 1.0). The Emax got stuck with the Formatting hard drive... message on the screen and the Spyrus busy-light didn't even come on. I waited for a couple of hours (in case the format could take a long time I thought) but finally when nothing happened I shut the Emax off and rebooted from floppy. The CF-card that came with the Spyrus is a 1GB 80x Speed Lexar card. After this failed attempt I have tried some other CF-cards that I have lying around (none below 1GB capacity) and some of them start to format and the busy-light comes on on the Spyrus but the formatting fails within seconds. However the Emax doesn't freeze with these cards. Does anybody have experience with CF-cards for the Emax and maybe with the Spyrus reader? Help would be much appreciated. Thanks, Kim Title: Re: CF-cards compatible with Emax 1 Plus and Spyrus reader? Post by: Wolfram on November 30, 2014, 02:42:14 PM You should use a old 32MB card.
Title: Re: CF-cards compatible with Emax 1 Plus and Spyrus reader? Post by: roginator on January 14, 2015, 01:36:52 PM I have installed raisin monster cards in Akai s1100 and E4 .. they work perfect BUT I also installed it in EMAX I /// I have one with scsi .. last rev PCB zip drive works perfect BUT /// rising monster have a problem…. i formated disk ( sandisk 32MB) I managed to load system into CF and few sound disks… and when i power up Emax it load system BUT when i want to load sound … it give me error like HARD DISK ERROR also when i wanna copy system for CF to disk … I get same error .. so it works flawless for loading system into emax and saving sounds from ram on CF .. but loading sounds from CF is problem/// also it won't format any CF bigger than 128Mb any idea |