|
Title: Identifying E1 connector Post by: brian_ronn on December 07, 2014, 09:52:29 AM Hi E1 users
In my E1 I have 8 connectors with a pin broken of. Therefore I need to identify the attached connector. Do you know the name of this connector and maybe where to purchase these in europe? Best regards Brian Title: Re: Identifying E1 connector Post by: EdGs on December 14, 2014, 04:21:28 PM I used these from Mouser Electronics
151-2P16-E Title: Re: Identifying E1 connector Post by: brian_ronn on December 15, 2014, 01:53:15 PM Hi EdGS
Thank you for replying :-) I've been searching for connectors with pin lenth of 5mm (0,5 cm) because the connector I pulled out of my E1 has this pin lenth. All of the connectors I've looked at on the net including the one you suggested seems to have a max lenth of 4mm (0,4 cm). Could it be that there are different sockets types between the E1's so some E1's need the 0,5mm pins and other E1's only need the shorter pins (just a wild thought). If not, I'll just go with the suggestion gave me which is working for you :-) Thank you Best regards Brian |