|
Title: replacing buttons and sliders - source? Post by: dvdborn on March 04, 2008, 04:56:17 AM Has anyone already replaced the buttons, sliders and pitch/mod wheel pots on their EIII?
Some of the buttons on my EIII are double triggering and the pitch wheel is constantly sending out MIDI CC messages because its center is shifting. Even after recalibration. I'd like to know a source where I can buy these parts, especially the buttons. And preferably not a place where you need to buy several hunderds at once. A while ago there was an EIII on eBay which had its buttons replaced by colored one. It looked ugly but it means they are still obtainable. Cheers, David Title: Re: replacing buttons and sliders - source? Post by: Escobar on March 04, 2008, 05:15:29 AM Check out www.farnell.com (http://www.farnell.com) and digikey.com (http://digikey.com)
They might have right knobs. They do have slider knobs for the EII, so why not for EIII. I'm not sure about the quantity you have to order but I guess it would cost you alot just for one piece. Title: Re: replacing buttons and sliders - source? Post by: karlscott on March 05, 2008, 03:25:22 AM If you do manage to find out let me know, as my friend has the same problem on his and he needs some also, Karl...
Title: Re: replacing buttons and sliders - source? Post by: dvdborn on March 05, 2008, 04:42:04 AM I found out that this company http://www.e-switch.com/ (http://www.e-switch.com/) is manufacturing the buttons for the EIII.
Here is their data sheet: http://spec.e-switch.com/X-A/XB0510P.pdf (http://spec.e-switch.com/X-A/XB0510P.pdf) Addendum: If you're looking for the part number it's: 320.02E, price is about 2.8 USD each and you have a choice of different colors. David Title: Re: replacing buttons and sliders - source? Post by: karlscott on March 05, 2008, 08:04:33 AM I put in that part number, but the site says it doesn't know that part number, could give us link directly to part page, thanks Karl...
Title: Re: replacing buttons and sliders - source? Post by: dvdborn on March 05, 2008, 08:29:15 AM I found out that the part number is only useful on a distributor's site.
Eg. Mouser: http://www.mouser.com/search/ProductDetail.aspx?qs=3Jlm%2fl9ddLzduopgbIZ2UA%3d%3d (http://www.mouser.com/search/ProductDetail.aspx?qs=3Jlm%2fl9ddLzduopgbIZ2UA%3d%3d) Title: Re: replacing buttons and sliders - source? Post by: karlscott on March 05, 2008, 08:41:03 AM Cheers!!!
Was gonna suggest Mouser earlier, that's where i got buttons for my MPC 3000 from... "if in doubt get mouser out" ;) Title: Re: replacing buttons and sliders - source? Post by: buchla on March 06, 2008, 04:28:18 AM What's the difference between "320.02E1-1.08BLK" and "320.02E1-1.09BLK"?
Title: Re: replacing buttons and sliders - source? Post by: dvdborn on March 07, 2008, 04:48:40 AM Looking at the data sheets on mouser.com the 320.02E1-1.09 have a larger button than the once of the .08
The .09 has a diameter of 15.88 while the .08 has a diameter of 12.40. I believe the .08 is the one that's used on the EIII. But since I haven't yet tried to replace the buttons myself, don't take my word for it. I hope someone here can confirm that the 320.02E1-1.08 will be the exact replacement type for the EIII buttons. David Title: Re: replacing buttons and sliders - source? Post by: karlscott on September 13, 2009, 04:56:20 AM Has anyone found a place where we can the sliders pots from????
Title: Re: replacing buttons and sliders - source? Post by: Escobar on September 13, 2009, 05:45:24 AM As Roginator already posted in the Emulator II section but here it is again: http://www.eprelectronics.com/store/html/index.html (http://www.eprelectronics.com/store/html/index.html) We should really start to collect all these links in the same place for easier access. |