|
Title: Emulator III/Emax II and the 640 Mb MO drive Post by: Oleg on February 05, 2019, 07:01:58 AM Hello! Does anybody know, will the Fujitsu SCSI MO drive "DynaMO 640 SE" work with Emulator III and/or Emax II? No matter how the EIII/Emax II will format the disks, if at all. Just will it work or not?
Thank you. Title: Re: Emulator III/Emax II and the 640 Mb MO drive Post by: Oleg on February 09, 2019, 11:38:32 AM The drive is recognized, but EIII writes and reads only disks with 128, 256 and 540 Mb capacity. 640 Mb disks are not recognized, since their sectors size is different, something like that. Didn't try with Emax II yet.
I would also like to thank Esynthesist for his Emuser and the EMXP software, I just bought the Emax I SE rack + Emuser for ~200 euros (ha-ha-ha!), and the whole system works flawlessly. Thank you, Sir, for your admirable work! You literally bring the E-MU magic "to the masses"! ;) Cheers from Moscow! Title: Re: Emulator III/Emax II and the 640 Mb MO drive Post by: dvdborn on February 09, 2019, 03:08:39 PM I?ve got several 640MB MO drives (also Fujitsu). But, I?ve never found a way to format them on my EIII.
It?s been several years since I tried it and I didn?t document my findings back then. I?ll give it a try again and report back. There has to be some interleave setting that should work. Side note: I am able to use the MO drives with my Roland S-770, E4XT and MPC3000. Title: Re: Emulator III/Emax II and the 640 Mb MO drive Post by: dvdborn on February 10, 2019, 04:01:42 PM I gave it another try today with a Fujitsu 640MB MO drive and several Sony 640MB MO disks.
I was unable to format any of the disks. Each time I was presented with a SCSI Hardware Error message. I tried several interleave settings. But, without any luck. However, I was able to use a 230MB MO disk in the 640MB MO drive. It looks like we won't be able to use 640MB MO disks with our EIII's. |