|
Title: EIII no Signal Mix OUT Post by: Alex Stone on August 16, 2009, 12:25:36 AM Hello friends! I use EIII keyboard version. There is a small problem: Sometimes it does not work Mix OUT (no signal). At the same time, each track individually produces a signal. Someone can tell what is the problem? And still not working 2 keys.
Title: Re: EIII no Signal Mix OUT Post by: esynthesist on August 16, 2009, 02:12:11 AM Check this thread:
http://eiiiforum.com/index.php?topic=5.0 I had the same problem two weeks ago with the stereo outs. The problem was solved after opening the EIII, pressing all ribbon cables going to the output board and also pressing the relay switch. So I didn't even had to replace or (de)solder anything... It still works fine and I used the EIII at least 2 hours a day since then... ///E-Synthesist Title: Re: EIII no Signal Mix OUT Post by: dr.c on August 16, 2009, 04:23:47 AM Yes, thats the +5V not arriving at IC3 on the jack board (outputs).
Solder a wire as specified. 2 keys not working ? You have got to take away the keyboard, dismount it, take away the rubber contacts and clean them, put them back. Be carefull with what you use. I use KF-F2 wich is a fantastic product, without risk. Google it to find it. Title: Re: EIII no Signal Mix OUT Post by: Alex Stone on August 17, 2009, 08:25:06 AM Thank you very much for your support! EIII (Mix OUT) while working without interruption. The keyboard will hear. Thank you!
Title: Re: EIII no Signal Mix OUT Post by: dr.c on August 17, 2009, 09:28:05 AM Its a pleasure !
Be carefull when dismounting the keyboard. You have to bend some parts with pliers. If you don't know how to do, take a picture, I will explain ! |