|
Title: 1st time problems with EII - any help? No booting any more etc. Post by: micromoog on January 17, 2010, 05:55:38 PM now i had at the first time problems with my eii.
Description: What i have done until getting problems: - i loaded some banks with sd into my eii (without problems) - after finding the right set, i've connected midi to the machine (without problems) - i jumped at the realtime-menu to set controllers (still without problems) - now all red-LEDs are on, playing the sounds was still possible - i pushed the buttons of the different areas, some LEDs went off - now i tried to send an other bank from SD (...SD loops Error message: can't connect EII...) - then there was a lot of shit at the eii display like "ยง#=?&%%" - now i turned the power switch off - after waiting a few minutues i tried to reboot the machine. - now there is every time a high frequency sound like a starting CD_ROM or plane -> "uuuuuuuiiiiiii" after switching on (2 or 3 sec long, btw a nice space-fx sound :)) - vintage flash-units for old photo cameras have the same sound by reloading - the floppy tries booting and hang up ,the current OS-version is shown at the display", it seems that the drives tries to load with a very slow, "click-click-click.." - then i tried both drives with different disks withot success. anyone an idea to fix this problem - thx for help Title: Re: 1st time problems with EII - any help? No booting any more etc. Post by: micromoog on January 18, 2010, 11:16:30 AM solved the problem,
perhaps it depends on using MIDI while SD is also aktive! After disconnecting the Midi-cable, all runs fine... |