|
Title: DIN sync for a Drumlator Post by: schmidtc on September 02, 2010, 10:43:26 AM I foolishly sold my drumulator years ago, but I wanted to share the really easy mod I did for DIN-sync. All you need is the 5 pin jack and some wire, or you could just build a custom cable. Connect pin 1 to the tip of the start/stop, pin 2 ground (sleeves) and pin 3 to the hot tip of the sync jack for 24ppqn clock. That's it!
http://www.doepfer.de/faq/gen_faq.htm Title: Re: DIN sync for a Drumlator Post by: Shogun on April 14, 2011, 01:11:34 PM Hi Schmidtc,
Want to sync my Drumulator to a Roland sequencer. Any chance of a diagram? I'm pretty good with a soldering iron if I am clearly told what I'm doing. Many thanks for any help. |