|
Title: Sound Designer EII from yahoo-group´s files-section Post by: n.flanders on October 02, 2011, 06:25:22 AM Hello fellow-emus ;D
Has anyone of you ever managed to unpack ans install the Sound Designer EII-file from the files-section of the EII- yahoo-group? When I tried to unpack it with stuffit-expander I got "disk-related error (-39). I would appreciate very much any suggestions or if anyone of you could make sure if this file is working at all. Regards Ned :) Title: Re: Sound Designer EII from yahoo-group´s files-section Post by: minphase on October 03, 2011, 07:38:40 PM Hey Ned,
I can verify that the file from the yahoo group is OK. I think I downloaded it onto a CDR as a raw .sit file or suchlike, and expanded it on the mac running System 7, which had an ancient stuffit on it. I just double clicked the file, once it appeared in the folder. I think it fits on a 1.44 floppy, too. Good luck, minphase Title: Re: Sound Designer EII from yahoo-group´s files-section Post by: inspactor on October 09, 2011, 01:20:34 PM hi i have the same problem i cant unpack the sd file always error 110 with stufix! i also try to put the alchemy on my powerbook 5300 but also without any effect! need also help!!thx
Title: Re: Sound Designer EII from yahoo-group´s files-section Post by: esynthesist on October 09, 2011, 02:22:29 PM I just tried these .SIT files (again) on my Mac Classic OS7.5
They expand without any problem. This is what I just did: 1/ download the .SIT file 2/ copied the .SIT file to a ZIP disk (can also be floppy 1.44) with MacDisk trial version 7.6 (without any specific configuration) 3/ copied this .SIT file from the ZIP disk to the hard drive of my Mac Classic using a SCSI zip drive 4/ expanded the .SIT file with StuffIt Expander version 4.0.1 The expansion and installation worked fine. Title: Re: Sound Designer EII from yahoo-group´s files-section Post by: ahaigh01 on October 09, 2011, 10:47:17 PM Hi,
I started a thread in the EII general section with some questions and this is also one of my problems. I can successfully use .sit files, but this one (SD EII) is a .bin file and I don't know how to extract the program from it without the error -39. Esynthesist, Please take a look at my thread because I have a couple more problems. Thanks! Maybe someone could upload the program as a .sit file. Title: Re: Sound Designer EII from yahoo-group´s files-section Post by: n.flanders on October 10, 2011, 10:52:25 AM Hello fello-emus ;)
At first thanks to minphase for verifying the SD EII-file from the yahoo-group is in deed ok. To all who have the same (-39)-error here is how i got it working: 1. Download the file to your PC 2. Format a floppy-disk with your mac 3. Use the "macdisk" for PC software to put the *.bin-file onto the floppy disk (it will bring the file into the correct format for use with your mac while putting it onto the floppy-disk) 4. Put the floppy-disk with the copied file into your mac 5. When clicking on the floppy-drive the SD EII will appear 6. Enjoy - SD EII will work ;D Title: Re: Sound Designer EII from yahoo-group´s files-section Post by: inyoro on October 23, 2011, 11:31:00 AM Can someone give the exact link for this software? Many thanks..
Title: Re: Sound Designer EII from yahoo-group´s files-section Post by: esynthesist on October 23, 2011, 01:32:36 PM Sound Designer for EII:
http://f1.grp.yahoofs.com/v1/QHKkTtYjgbGzJ4l4cTlYYLwUyftyNq3XE6lbWlWzxHhCJyXnCxWgoJiy3uAQpUln5HOauNvzSUHR50VapjLw/Editing/Sound%20Designer%20E%20II.bin (you must be member of that Yahoo group for download rights) MacDisk for Windows: http://www.macdisk.com/mden.php |