|
Title: Output test? Post by: PX-7 on December 14, 2009, 10:18:04 AM Is there a command or way to test all your outputs?
I thought I read that at one time? Also how do I do a memory test to make sure all my ram chips are working? thanks Title: Re: Output test? Post by: dr.c on December 14, 2009, 11:16:26 AM The ram test :
Type : Master 8 0 1358 2 Sound test, go to disable outputs disable them all, then able output 1, test it, disable it, then able output 2, etc... Title: Re: Output test? Post by: Twosocks on March 11, 2010, 02:19:07 PM Frequency response test:
Goto Master module Special, Press "0" Magic code 1358 Select 4 Hook up MonoMix out to Right sample in. Set sample input level to 0 After test it should say All Channels OK This tests all ind. outputs and shows dead or bad channels. In case of failure, reseat the flatcables before panicking ;) Before running this test, make sure all sliders are calibrated and saved! (Master, Special 3. Save all trims after each step.) Regards, Peter. |