Seize screw

[DARKSHINE]

I have lost my screw , for close my eii
I have try many screw,  i don't work ! What original seize ? Link from eBay, please

[lubb]

Hi,

I think the trouble is not in the size of the screw, but in the thread of the screw... I faced the same problem when closing one E-mu vintage machine... In the store told me the thread of the screw I need is of non-metric type which is very hard to locate nowadays...

[pulsemod]

I had to purchase all the screws to close up an EII because they were lost by the previous owner. I used these 5-32 ones:

http://www.ebay.com/itm/screw-5-32-3-8-phillips-stainless-31000100x10-/130440005123?pt=LH_DefaultDomain_0&hash=item1e5ed48603

[DARKSHINE]

Thanks !!!!!!

screws, it's all simple but I try many
Thank you for the links I can not seem to buy it, it only delivers the USA,
Is there a particular depth to meet?
I else to sell, but there are longer

[pulsemod]

Well the ones I used are 3/8" and are a little longer than they have to be. You'd probably be fine with 1/4". I see some other 5-32 ones on Ebay that ship worldwide. Not much in the way of phillips pan head unfortunately.

http://www.ebay.com/itm/5-32-x-1-4-PTFE-Slotted-Round-Head-Screw-5-pkg-Z12285-/320670891526?pt=LH_DefaultDomain_0&hash=item4aa9797e06

[DARKSHINE]

it works, unfortunately there are teflon, the dimensions are OK

Now, I have one another screw to change on the suport of power Psu ( 4 screws )

if you know the dimension ?

[DARKSHINE]

PIC :

[DARKSHINE]

if you know seize of screw of PSU ? ?

[pulsemod]

The ones that secure the power supply to the base/rear of the sampler are the same ones used to attach the top to the base.