Files required on SD card for HXC Operation

[Elmbeatz]

Hi freaks!

Could someone sum up what files (besides any soundbanks in *.em1 format) are required on the SD card to fire the Emax up via HxC Floppy Emulator?
Is the OS (*.emx) required besides the HxC config file?

Thanks in advance,

Elm.

[kdk]

You need to convert the Emax disk images into .hfe files for the HxC to read them. Read up on the HxC software to see how. eSynthesist has a greatly detailed instructions on how to run the HxC with the EI and EII - read it as well. It's the same principle.

[Elmbeatz]

Was there some kind of way to convert *.eb1 files to *.em1

[kdk]

EM1 = Disk image
EB1 = Only a bank

So you need to generate an EM1 from the EB1 with emxp.

(The info above was taken from: http://torlus.com/floppy/forum/viewtopic.php?f=15&t=1143 )

So I think you need to make a disk image from the bank info in EMXP and them convert it with HxC software.

[Elmbeatz]

thanks very much!

The hxc seems to work, but now - another problem...

See my new thread