emu iii CRASH

[ARES]

Hello Dr C.

Yes the scsi seems not to be the problem because even if i open my emu, the problem is still the same !

I may add this  :

1° ) when i took up my PCB with the mémory , the emu boot correctly till it said something like ( i don't remember  exactly ) miss something ... of course !

2° ) so i decided to spay pcb cleaner on this board and in the memory and clean them ... this was logic  as operation

3° ) i put in my pcb and the problem is the same xith a new one... stereo outputs  don't work  when i tested the machine ! ! ! !

VERY CURIOUS ...

[ARES]

i just take off the pcb with memory and the display said :

check scsi , floppy,mounting board, and finally " can't load system"

So if the emu boot at this time , the problem is in the pcb with memory , isn't it ?

What do you think ?

[dr.c]

My God....

The PCB with the memory (top one) is the microcontroler bboard and the machine will never work witout it !

Did you make a memory test ?

If you don't know : Master-8-0-1358-2

[ARES]

OK Dr C.

memory test  : ok

I've cleaned all of my pcboards ...

The unit works now... but i do not know if it will be stable in time .

The stereo ouputs work too => i recalibrate them + i did what you said in another topic.

Curious, very  curious beast that EIII.

[dr.c]

Pray !!!!