problem with EmuII+

[Eric]

Hallo does eny one ever got this problem on the emulator II+ it goes like this: when i make a sample sound and i play it  on the keyboard i hear between the right volume on the key suddenly a must louder sample sound  and that`s for every key  the similar problem  ,but when i play a library sound from disk then is the sound over every key the same volume,that`s strange huh!!  I hope so any one can help me with that problem ,cheers

[dr.c]

Eric, I ma sorry, but I don't understand this :

keyboard i hear between the right volume on the key suddenly a must louder sample sound  and that`s for every key  the similar problem  ,

Can you explain again, please ?

[Eric]

Hallo what nise the you responding thank you  Doctor c  now here come`s my  english ,after i sample a sound and than i press a key than i hear the normal volume that but after the same key hits i hear a louder sound after i think after7 hits,  it`s like low low low low low low loud low low low low low low loud, but that not when i set the solo  fuction than its allright i find have find out,that it so strange about it ,thank you hope you understand it a little! greetings from Holland!!,bye

[dr.c]

Yes... there is a channel problem, apparently.

Load a sound, go to Special, channel disable, and disable all channels.
You should not hear anything anymore, wich is NORMAL, but we have to try this first, just to see if the channel assignation works !

Enable channel 1 and play. Normal ? Disable channel 1
Enable channel 2 and play. Normal ? Disable channel 2
Enable channel 3 and play. Normal ? NO ? Note the channel number. Disable channel 3
Enable channel 4 and play. Normal ? Disable channel 4

etc...

Send us a report.

Cheers

[Eric]

 hi agian I  did  what your say!Dr c !! the  channel assignation works !
and i   have find out that channel 6  don`t make a sound and 5 is making a distorted sound
so two channels  are not good,and what i also did whas this i have
taken off the S3528 of the considered channel and put it back in place.

and still 2 BROKEN CHANNELS !!the software could that  be it ?i only have one copy of the the bad perfomance disk wich i make 5 copy`s to see if that whas the problem but the bug is in that one diks i think and copie that diks is not the answer
i think ,what do you think ?      cheers .

[dr.c]

Swap the S3528s from channel 5 and 6 and see if the problems move with them !

If not, there are some other circuits, like the SSm, etc... wich you can take off and put back in place.

As well, instead of listening to the mix output, try to listen by the separate outputs, sometimes the channel "mixer" had problems (rare, but it happened).

[Eric]

hi Dr.c still the same problem with channel 5 and 6 i have move the s3528s to another channel  and pull the ssm out and put back in place ,

[dr.c]

Pfffff......

Just operate on channel 5 and 6, no other one, ok ? Otherways, you are going to put a huge mess.

If you exchange the S3528 for channel 5 to 6 and 6 to 5, what happens ?

Does channel 6 have now the problem of channel 5 and vice-versa ?

What happens EXACTLY, please ?

[Eric]

 i have exchange S3528 channel  1  2 to 5  6
 and the same with the ssmchip but i can put it back ore is that to late
 

[dr.c]

I don't understand a word of what you wrote.
I am almost out of patience, there...

What the F*** is happening when you exchange the S3528 form channel 5 to 6 ?

This is ALL I am asking !

Is now channel 5 not working and channel 6 making a distorded sound ?

[Eric]

hallo dr.c  i have exchange the S3528 from channel 5 to 6
and its the same 6 is still not working and 5 is distorted

[dr.c]

Ahhhh !!!!! At last ! 

I have to look on schematics but we have chances to have it working now !!!!

(20 minutes passed, here)

Okay, I know (I think).

I need you to make pictures of the region of channel 5 and 6, very neat pictures and put them here. Iwill then put intructions on the pictures and send them back here. This because I don't have any EII in front of me. OK ?

[Eric]

Oke !!  I  make an good foto 

[Eric]

http://viewmorepics.myspace.com/index.cfm?fuseaction=viewImage&friendID=480886145&albumID=464019&imageID=2100101

[Eric]

http://viewmorepics.myspace.com/index.cfm?fuseaction=viewImage&friendID=480886145&albumID=464019&imageID=2100014



http://viewmorepics.myspace.com/index.cfm?fuseaction=viewImage&friendID=480886145&albumID=464019&imageID=2108595

Hi Dr.c i hope these pictures are alright !many thanks