E-mu Emulator Sampler User Forum for the EIII EII EI and EIII XP - Emulator 4 K Issue

 Welcome, Guest. Please login or register.
Did you miss your activation email?
November 21, 2024, 10:44:42 AM
Home Help Search Login Register
News: Problems registering? Send an email to: EIII @ telenet.be (without the spaces)

+  E-mu Emulator Sampler User Forum for the EIII EII EI and EIII XP
|-+  General Category
| |-+  EIII Technical Issues / Tips
| | |-+  Emulator 4 K Issue		 « previous next »
Pages: [1] Print
Author Topic: Emulator 4 K Issue  (Read 5637 times)
midipuppies
Full Member
***
Offline Offline

Posts: 305
« on: August 03, 2009, 03:22:34 PM »
Hey guys, I just picked up an E4K Turbo board Tongue. So when I switch it on, the display goes solid black and all the panel leds stay on. The floppy does not engage or light up. The scsi drive does not spin up either. Basically, it makes no startup sounds at all. I have checked all the boards and ram and they are all secured firmly. Power supply or floppy is my guess.
I just rekon that you guys have knowledge of most things E-mu, so I posted. (Thanks Doc)
Logged
The problem is not the problem.
Your attitude toward the problem is the problem.
rokuez
Administrator
Full Member
*****
Offline Offline

Posts: 161



WWW
« Reply #1 on: August 04, 2009, 01:20:20 AM »
did you try

emu-sampler.de

&

emusonacid.co.uk

?
Logged
Macbook Pro 2.6 Ghz, 2.3 intel cpu w/ RME Fireface 800 Mackie HR824 s, PC p4 2.3 180 gig hd, 2 gb ram, Emu 1212m adat out 2 the rme, M-Audio Midisport 2x2, & . Atari ST Notator SMPTE Tracker, Yamaha kx88 , E-mu Emulator II, 2 Emu Emulator III rack, Prophet 5 Rev2, Andromeda
dr.c
E-mu Doctor
Hero Member
*****
Offline Offline

Posts: 903


I'm a hot dog !
« Reply #2 on: August 04, 2009, 02:36:47 AM »
The questions and advices I am giving here are as well usefull for EIIIs and other machines.

Do you hear a whistle (not forceably in the audio) ?
Disconnect the front panel, power up (don't worry, just do it). Does the SCSI drive spin ?
Logged
midipuppies
Full Member
***
Offline Offline

Posts: 305
« Reply #3 on: August 13, 2009, 06:28:42 PM »
Finally got around to working on this.
Drive does not spin up.
I disconnected the front panel, but nothing has changed.
Logged
The problem is not the problem.
Your attitude toward the problem is the problem.
dr.c
E-mu Doctor
Hero Member
*****
Offline Offline

Posts: 903


I'm a hot dog !
« Reply #4 on: August 14, 2009, 04:18:25 AM »
In this case, reconnect your front panel, disconnect the hard disk (if its internal, disconnect the flat cable and the power supply) and power-up. Something is crashing the data/adress buss.
We are no yet fixing your machine, we are trying to diagnose a problem.
Logged
midipuppies
Full Member
***
Offline Offline

Posts: 305
« Reply #5 on: August 14, 2009, 04:21:12 AM »
Disk disconnected- still the same.
Logged
The problem is not the problem.
Your attitude toward the problem is the problem.
midipuppies
Full Member
***
Offline Offline

Posts: 305
« Reply #6 on: September 07, 2009, 05:08:23 AM »
So, if anyone ever has this problem on an E4K (or any EOS unit for that matter), i figured out that it was the PSU bringing the whole thing down. Strange I know, but that was the issue. Works like a champ now.
Now if I could just get that EIII working......... Tongue
Logged
The problem is not the problem.
Your attitude toward the problem is the problem.
Pages: [1] Print 
« previous next »
Jump to:  


Login with username, password and session length

E-mu Emulator Sampler User Forum for the EIII EII EI and EIII XP - Emulator 4 K Issue

SEO light theme by © Mustang forums. Powered by SMF 1.1.21 | SMF © 2015, Simple Machines