EIII Remote soft - anbody works w/ it?

[lubb]

Many thanks for this great tip, I have downloaded the Transmac and will try...

[lubb]

Finally the EIII RC and the EIIIX RC transferred with Transmac, and... IT WORKS with EIIIX perfectly, a whole new world has opened for me, for controlling the EIIIX is a breeze now...........!! Tomorrow I will try with EIII...

I owe to you a bottle of whiskey... !

[Twosocks]

Please let us know if it works with the EIII too.

[lubb]

YES, it works..!! and it works perfectly! (EIII Rack, 8MB, OS, 2.42). The only thing I have to adjust is under MIDI setup : Thru: switch to Echo Opposite (Off does not work from unknown reason).

Oh, this is a bright day...

[Twosocks]

YES, it works..!! and it works perfectly! (EIII Rack, 8MB, OS, 2.42). The only thing I have to adjust is under MIDI setup : Thru: switch to Echo Opposite (Off does not work from unknown reason).

Oh, this is a bright day...

That's great news 

Is it possible to provide me with some of the SysEx messages so I can try and make the EIII communicate with a Windows/Linux PC?

I tried some variations from the EMAXII protocol, adapting the device ID, but had no succes.

There are several ways to read the messages, e.g. Midi-monitor from an U20/U220, or MidiOx software.

Regards,

Peter. 

[lubb]

Of course, with pleasure!... I will monitor it with the MidiOx... It would be a fantastic thing to have it working also under Win, and - even better - under Linux... !!

Best wishes,

Lubos

[micromoog]

great!

That let me hope

My dream: "Regelwerk" to EIII...

[lubb]

When EIII RemoteController launches, it transmits to EIII:

 TIMESTAMP IN PORT STATUS DATA1 DATA2 CHAN NOTE EVENT               
 000AD9C0   2   4     F0  Buffer:     7 Bytes   System Exclusive     
 SYSX: F0 18 03 07 01 0A F7
 000ADABB   2   4     F0  Buffer:     7 Bytes   System Exclusive     
 SYSX: F0 18 03 07 00 0A F7

The 6 modules transmitted from EIII RC (Master, Sample, Preset Man., Digital Proc., Preset Def., Analog Proc.)

 TIMESTAMP IN PORT STATUS DATA1 DATA2 CHAN NOTE EVENT               
 00070191   2   4     F0  Buffer:     7 Bytes   System Exclusive     
 SYSX: F0 18 03 07 01 28 F7
 00070DE8   2   4     F0  Buffer:     7 Bytes   System Exclusive     
 SYSX: F0 18 03 07 01 29 F7
 00071BFA   2   4     F0  Buffer:     7 Bytes   System Exclusive     
 SYSX: F0 18 03 07 01 00 F7
 000725D8   2   4     F0  Buffer:     7 Bytes   System Exclusive     
 SYSX: F0 18 03 07 01 08 F7
 000730C5   2   4     F0  Buffer:     7 Bytes   System Exclusive     
 SYSX: F0 18 03 07 01 12 F7
 00073D41   2   4     F0  Buffer:     7 Bytes   System Exclusive     
 SYSX: F0 18 03 07 01 02 F7

When pressed Master module from EIII panel, it transmits to EIII RC:

 TIMESTAMP IN PORT STATUS DATA1 DATA2 CHAN NOTE EVENT               
 000F5097   2   4     F0  Buffer:    26 Bytes   System Exclusive     
 SYSX: F0 18 03 07 10 08 01 09 00 08 0C 20 20 20 20 20 20 20
 SYSX: 4D 41 53 54 45 52 20 F7
 000F50A6   2   4     F0  Buffer:    26 Bytes   System Exclusive     
 SYSX: F0 18 03 07 10 20 20 20 20 20 20 09 40 08 0C 08 01 09
 SYSX: 00 09 07 4D 41 53 54 F7
 000F50B2   2   4     F0  Buffer:    26 Bytes   System Exclusive     
 SYSX: F0 18 03 07 10 45 52 08 0C 09 54 20 53 65 6C 65 63 74
 SYSX: 20 61 20 53 75 62 6D F7
 000F50BE   2   4     F0  Buffer:    14 Bytes   System Exclusive     
 SYSX: F0 18 03 07 10 6F 64 75 6C 65 20 09 00 F7
 000F50C4   2   4     F0  Buffer:    11 Bytes   System Exclusive     
 SYSX: F0 18 03 07 10 0A 6D 7F 43 05 F7

Hope it helps...!

Lubos

[Twosocks]

Fantastic!!! Thanks very much already 

[micromoog]

YES, it works..!! and it works perfectly! (EIII Rack, 8MB, OS, 2.42). The only thing I have to adjust is under MIDI setup : Thru: switch to Echo Opposite (Off does not work from unknown reason).

Oh, this is a bright day...

Tried this too, but the remote soft didn't work!

The little midi-remote-keybord from the tools menu sends notes to the eiii, but the (remote-) display is still empty and the remote-functions doesn't matter anything to the EIII.
I tried "Wait for EIII" and "Beginn macro controll", but nothing happens.

Where can i see the version# of the remote soft?

What have i to setup in the EIII and the Remote-Soft?

[lubb]

Did you do this adjustment in the MIDI setup of the Remote Controller : Thru: switch to Echo Opposite..? When I leave it Off - which is default - it does not work..!

...and you have the EIII connected bi-directionally to the Mac, I suppose..?

...and are you using the latest OS (2.42) in your EIII..? EIIIX needs at least OS 1.31 for the Remote Controller.

Also:
 1. Check MIDI cables and interface

2. Make sure that the EIII SCSI ID (MASTER/GLOBALS/Disk Utilities, 0 ) and the Remote Controller IDs (Control Menu) both match !!!

Make sure thet the MIDI port on the Remote Controller is set correctly.

[micromoog]

thanks a lot lubb!

the ID was wrong! Now it works!


Is rher anywere a documentation about the remote soft?

[lubb]

yes, on the Emulator Archives, but the link for downloading does not work any more. if you let me know your email, I will send you the RC manual in PDF.

[micromoog]

Thanks for the pdf, lubb!

Question to all:

Is there anywere in the world a spec-sheet with all sysex data?

Remote is fine, but "only" a frontpanel simulation. Of course you can record the "touch"-sequences, but then you have about 5 to 10 F0...F7 Strings.
I three a direct access to the parameters possible?

[esynthesist]

Is there anywere in the world a spec-sheet with all sysex data?

Emulatorarchive said "no"...
But maybe it's out there somewhere.
Unfortunately the EIII was released one year later than the release of De Furia's MIDI System Exclusive Book.