preset definition 'different software' error

[vegas]

Hi,

I am unable to create new presets as it states 'different software' when I select the preset definition button. I have been able to do so in the past.
btw...I seem to have a buggy e3.

cheers

[dr.c]

How many disks are connected ?
We had the same error when the software were embedded into the diskettes in the E2's, writing : "Overlay load error" on the display

[vegas]

Hi,

Thanks for the reply Dr. C.
I only have the internal HD.
I think at one point I tried hooking up my external scsi to it and perhaps that messed it up somehow. I never did get the external device working on it.
cheers

[dr.c]

Start with your system floppy inside the machine,see if it does the same. If it works okay, reinstall the OS.

What disk is inside ? What did you try to plug into it as a disk ?

[vegas]

Hi,

Yes you were right again Dr. C.  I loaded the o/s from floppy and then saved onto my internal. 
Merci Beaucoup

[dr.c]

Its really a pleasure.

Now, was this OS the original from YOUR machine ?

Otherways, you havr to recalibrate it ! Gna gna gna !!!!   

[vegas]

yes it was the original o/s from the machine.
It was working for a few hours and i thought that maybe all my problems were over.
But alas, I turned it on again and it crashes sometimes and works for a half hour and then crashes.-really unreliable.
damn

[dr.c]

Take off the top card, remove the memory simms, clean the contacts, put everything back in place, and retry.