Data-Slider Replacement

[micromoog]

hi

my dataslider went crazy. It works the most time but now very often values are jumping to the current slider position.

Is there a common standard part available for replacement? Or is it a "special" one?

My old diva has also other "parttime" problems.
Loosing a voice, then i put all conecters and pcb's out and back in - then it works again.
Any ideas to fix this "sporty activities" for a longer period?

[dvdborn]

I've also got the jumping data slider problem. Most of the times it gets away when I clean the slider. But it always comes back at one point. It isn't really a problem for me since it only happens when the slider is not in use.

[dr.c]

Any slider of the same value (be carefull thet the points are at the same place (cursor, etc) and law must be A (Linear).

(Sorry, there was a link wich had nothing to do here)

My old diva has also other "parttime" problems.

What does it mean ?

Change the flat cables if you mean these cables, stop messing around,

[micromoog]

Thanks for the answers!

"Parttime" problems means the machine works after reconnecting very well for a few weeks, then the same problems will appear again and again!

There seems nothing damaged or really defect.

[alphabyte]

I had this problem with my Emax II for a while. Temp solution was to recalibrate the data range to the stable part of the slider. Not a great solution, but, it worked well enough.

I ended just buying a slider from EPR electronics along with some other parts I needed for various things. Replaced the slider and she is as good as new.