E-mu Emulator Sampler User Forum for the EIII EII EI and EIII XP - Gotek Hxc with 2.42 OLED Display and Rotary Encoder Project

Welcome, Guest. Please login or register.
Did you miss your activation email?
November 10, 2024, 02:22:52 PM
Home Help Search Login Register
News: Problems registering? Send an email to: EIII @ telenet.be (without the spaces)

+  E-mu Emulator Sampler User Forum for the EIII EII EI and EIII XP
|-+  General Category
| |-+  EII General Discussion
| | |-+  Gotek Hxc with 2.42 OLED Display and Rotary Encoder Project
« previous next »
Pages: [1] Print
Author Topic: Gotek Hxc with 2.42 OLED Display and Rotary Encoder Project  (Read 5542 times)
dfiorucci
Full Member
***
Offline Offline

Posts: 141


« on: February 27, 2020, 03:15:48 PM »

So I installed a 0.91 OLED display along with the a rotary encoder into the Gotek case.
After using it for a couple of weeks I've come to realize my eyes are having a hard time reading the display after awhile.

So I started to look into adding a larger display.
What I've been able to model up is a 5.25 floppy sled that will house a 2.42 OLED 128x64 along with the Gotek pcb and rotary encoder.

Should be allot easier to read.
I tried to upload a picture but the folder was full.
Logged
dfiorucci
Full Member
***
Offline Offline

Posts: 141


« Reply #1 on: March 02, 2020, 06:50:36 PM »

If you would like to get a sneak peak at what I have planned PM me.
Logged
dfiorucci
Full Member
***
Offline Offline

Posts: 141


« Reply #2 on: March 05, 2020, 06:54:24 PM »

Now with Pictures
Standard Gotek case with 0.91" OLED Display on top
New 5.25" floppy sled with 2.42" OLED on the bottom.
Also working on a hardware debounce using schmitt triggers for absolute zero jitter from the rotary encoder.


* 3.jpg (184.35 KB, 968x549 - viewed 676 times.)
Logged
dfiorucci
Full Member
***
Offline Offline

Posts: 141


« Reply #3 on: March 07, 2020, 05:40:24 PM »

Hardware debounce circuit and PCB design done. Grin
Project starting to take shape.


* Debounce.jpg (85.91 KB, 1278x881 - viewed 656 times.)
Logged
Electro disco club
Full Member
***
Offline Offline

Posts: 81

Sp 12 turbo / Emu II /


« Reply #4 on: March 09, 2020, 01:26:46 PM »

Looks Amazing work.
Great!
Logged

2 hands with 10 fingers
dfiorucci
Full Member
***
Offline Offline

Posts: 141


« Reply #5 on: March 11, 2020, 07:32:21 PM »

I made a second version in case someone wanted to mount it in a Gotek case.
Because if it was attached to the rotary encoder it wouldn't fit.
The J2 header pins go to the rotary encoder.


* debounce2.jpg (59.7 KB, 1278x881 - viewed 654 times.)
Logged
dfiorucci
Full Member
***
Offline Offline

Posts: 141


« Reply #6 on: March 11, 2020, 07:34:19 PM »

Made some small revisions to the original put in the rotary encoder and was able to get rid of the one via in the routing.


* debounce1.jpg (53.66 KB, 1278x881 - viewed 656 times.)
Logged
dfiorucci
Full Member
***
Offline Offline

Posts: 141


« Reply #7 on: March 15, 2020, 03:49:39 PM »

3d printer arrived and I have the first prototype done just waiting on new display to arrive.
Also waiting on black ABS filament for the final version.
The display area is going to be a great improvement.


* IMAG1446.jpg (1712.91 KB, 3264x1840 - viewed 679 times.)
Logged
dfiorucci
Full Member
***
Offline Offline

Posts: 141


« Reply #8 on: March 16, 2020, 08:15:33 PM »

I once was blind but now I can see Grin
I could see this from 10 feet back.
No more squinting LOL.
Only problem is they sent me a white display instead of the blue one that I ordered.
Didn't notice it until I turned it on after installing it.
All that is left is printing the new bracket with a small modification out of black ABS and installing the debounce PCB once it arrives.
If any one is interested PM me.


* IMAG1452.jpg (1580.7 KB, 3264x1840 - viewed 666 times.)
Logged
dfiorucci
Full Member
***
Offline Offline

Posts: 141


« Reply #9 on: March 27, 2020, 12:57:40 AM »

Here are the before and after pictures.
I'm very pleased with the results.


* IMAG1468.jpg (1354.8 KB, 3264x1840 - viewed 718 times.)

* IMAG1433.jpg (1640.26 KB, 3264x1840 - viewed 675 times.)
Logged
Electro disco club
Full Member
***
Offline Offline

Posts: 81

Sp 12 turbo / Emu II /


« Reply #10 on: March 28, 2020, 02:02:10 AM »

Great,
You have to serialize this job
 Wink
Logged

2 hands with 10 fingers
dfiorucci
Full Member
***
Offline Offline

Posts: 141


« Reply #11 on: April 08, 2020, 06:28:57 PM »

I'm getting ready to start production on these if you are interested in one PM me.
Logged
Pages: [1] Print 
« previous next »
Jump to:  


Login with username, password and session length

E-mu Emulator Sampler User Forum for the EIII EII EI and EIII XP - Gotek Hxc with 2.42 OLED Display and Rotary Encoder Project

SEO light theme by © Mustang forums. Powered by SMF 1.1.21 | SMF © 2015, Simple Machines